HI guys,
doing a bathroom renovation and owner/builder wants to put a light switch on a load bearing wall where the timber supports are. Idea is to notch out a chase in the timber for the cables. This will mean that the cable will be directly beneath the plaster board. What mechanical protection do people recommend? Sheet metal a couple mm thick fixed over the chase? Other option was to come down inside the cavity slider. I've never put a light switch on a cavity slider before, just wondering what others think for this ideal?
Mechanical Protection
-
- Posts: 6
- Joined: Fri Jul 24, 2020 2:00 pm
- Has thanked: 0
- Been thanked: 0