Separation Distances from califont
Posted: Mon Jul 20, 2020 6:01 pm
Hi all,
Just after some clarification on distance of LV from a gas califont (instantaneous water heater).
I know about distances from regulators (800mm from riser) and distance from cylinders (exchange/in-situ fill) but can't find anything about califonts which are generally plugged in to an outside ppt anyway. I've always just applied the 800mm rule for them when installing heatpumps however would like to know if there is an actual requirement apart from general separation of service lines (gas/water) from LV.
Cheers
Just after some clarification on distance of LV from a gas califont (instantaneous water heater).
I know about distances from regulators (800mm from riser) and distance from cylinders (exchange/in-situ fill) but can't find anything about califonts which are generally plugged in to an outside ppt anyway. I've always just applied the 800mm rule for them when installing heatpumps however would like to know if there is an actual requirement apart from general separation of service lines (gas/water) from LV.
Cheers