Signage when working?
Posted: Wed Apr 29, 2020 10:46 pm
Does anyone use the ESR 18A signage?
I use something similar to this
https://nzsafetyblackwoods.co.nz/en/ris ... neEALw_wcB
electricalforum.nz
All things electrical for the industry
http://electricalforum.nz/
Signage when working?
Page 1 of 1
Re: Signage when working?
Posted: Wed Apr 29, 2020 11:33 pm
Re: Signage when working?
Posted: Fri May 01, 2020 8:42 pm
ESR 18
18 Notices where high voltages used, generated, or transmitted
(1) Notices providing instructions on the treatment of electric shock must be
installed in a conspicuous position, and be maintained, on the following:
(a) all premises where electricity is, or is to be, used at high voltage; and
Part 2 r 18 Electricity (Safety) Regulations 2010
Reprinted as at
21 January 2019
30
(b) all premises where electricity is generated, or from which it is transmit-
ted, at high voltage.
Im just an apprentice.
Any examples of where these would be used?
18 Notices where high voltages used, generated, or transmitted
(1) Notices providing instructions on the treatment of electric shock must be
installed in a conspicuous position, and be maintained, on the following:
(a) all premises where electricity is, or is to be, used at high voltage; and
Part 2 r 18 Electricity (Safety) Regulations 2010
Reprinted as at
21 January 2019
30
(b) all premises where electricity is generated, or from which it is transmit-
ted, at high voltage.
Im just an apprentice.
Any examples of where these would be used?
Re: Signage when working?
Posted: Fri May 01, 2020 9:29 pm
Hey mate you're looking at ESR18, ESR18A is right below
Re: Signage when working?
Posted: Tue May 19, 2020 11:19 am
I use a pair of floor-signs similar to Jamie's.