Welcome to the group

Post Reply
User avatar
gregmcc
Site Admin
Posts: 189
Joined: Sun Apr 12, 2020 4:45 pm
Has thanked: 18 times
Been thanked: 49 times

Welcome to the group

Post by gregmcc »

Hi everybody,

Welcome to the group, Hopefully someone with a bit more knowledge than me will point me in the right direction on importing the old forum posts, but for now i'll kick this off.

future plans, for now I don't mind approving new users and playing moderator, as things get more busy I may ask for help and assign moderator rights to those that want.

If you already haven't read them, there are some FUG's (forum user guidelines), these were copied with permission from geekzone.co.nz. Please read these, basically keep it civil, don't swear.
If you have any suggestions etc, let me know.

Greg
These users thanked the author gregmcc for the post (total 2):
t92300 (Mon Apr 27, 2020 3:42 pm) • Whk_Tech (Thu Apr 30, 2020 11:06 pm)
Rating: 33.33%
User avatar
DougP
Posts: 242
Joined: Sun Apr 12, 2020 10:11 pm
Answers: 3
Has thanked: 19 times
Been thanked: 31 times

Re: Welcome to the group

Post by DougP »

Thanks for putting in the effort to get this started Greg!
JGPhilpott
Posts: 1
Joined: Mon Apr 13, 2020 8:21 pm
Has thanked: 0
Been thanked: 0

Re: Welcome to the group

Post by JGPhilpott »

Awesome work, hopefully we can make it flourish!
Last edited by JGPhilpott on Tue Apr 14, 2020 11:14 am, edited 1 time in total.
Craig W
Posts: 6
Joined: Tue Apr 14, 2020 7:30 am
Has thanked: 3 times
Been thanked: 0

Re: Welcome to the group

Post by Craig W »

Thank you for this Greg
JamieP
Posts: 478
Joined: Tue Apr 14, 2020 11:08 am
Has thanked: 92 times
Been thanked: 18 times

Re: Welcome to the group

Post by JamieP »

Let's try this again, figured this user name would make me easier to address
Shocker
Posts: 3
Joined: Tue Apr 14, 2020 9:43 am
Has thanked: 1 time
Been thanked: 0

Re: Welcome to the group

Post by Shocker »

thank you for setting this up. I will endeavor to contribute where I am able. Cheers
Peter
Posts: 21
Joined: Mon Apr 13, 2020 10:19 am
Has thanked: 25 times
Been thanked: 2 times

Re: Welcome to the group

Post by Peter »

Interisting , first MA said they were abandoning the old forum because of spam . Now they are saying the old forum had poor advice . And facebook will make sure advice is better because it will no longer be anonymous .
User avatar
gregmcc
Site Admin
Posts: 189
Joined: Sun Apr 12, 2020 4:45 pm
Has thanked: 18 times
Been thanked: 49 times

Re: Welcome to the group

Post by gregmcc »

I think we just let them get on with what they are doing, I tried helping them out a while back with their forum but it was ignored. Time will if facebook is the way to go or a traditional forum is the way to go.
User avatar
Whk_Tech
Posts: 9
Joined: Tue Apr 21, 2020 9:35 pm
Has thanked: 4 times
Been thanked: 0

Re: Welcome to the group

Post by Whk_Tech »

Hopefully all the knowledge returns and the 'library' gets filled back up again :) . There was alot to be learnt from browsing the old forum.
User avatar
Sneath
Posts: 8
Joined: Mon Apr 13, 2020 9:33 pm
Has thanked: 1 time
Been thanked: 0

Re: Welcome to the group

Post by Sneath »

Thank you Greg for the setup and acceptance to the forum.
PeteRig
Posts: 149
Joined: Sat Apr 25, 2020 2:38 pm
Has thanked: 55 times
Been thanked: 31 times

Re: Welcome to the group

Post by PeteRig »

I believe this forum will flourish and continue to be a useful tool to all those in the industry!
I followed the old site for many years (even though i didn't contribute) what I got out of it (and passed on to others) was so satisfying, this site will be the same for sure!
Like all forums you get varying opinions, interpretations and knowledge levels, so sharing helps everybody develop.
If an unusual or inaccurate comment is made by a contributor don't come down on them or be little them, give them credit for asking and wanting to learn, as we all are and will never know it all.

Cheers guys and keep the excellent discussions going
Peter
These users thanked the author PeteRig for the post (total 3):
t92300 (Mon Apr 27, 2020 7:26 pm) • Peter (Wed Apr 29, 2020 11:20 am) • Whk_Tech (Thu Apr 30, 2020 11:05 pm)
Rating: 50%
Post Reply