Request a new Forum here

Post Reply
User avatar
gregmcc
Site Admin
Posts: 103
Joined: Sun Apr 12, 2020 4:45 pm
Has thanked: 5 times
Been thanked: 34 times

Request a new Forum here

Post by gregmcc »

Suggest here for new forums, There is no guarantee that the new forum will actually be created, but it's a starting point.
User avatar
DougP
Posts: 139
Joined: Sun Apr 12, 2020 10:11 pm
Answers: 2
Has thanked: 8 times
Been thanked: 20 times

Re: Request a new Forum here

Post by DougP »

As I think of them :)

Appliances - Connection & repair
Circuit sizing - current rating & voltage drop
Protective devices - Overcurrent, short circuit, RCD
Testing & verification
Transportable installations
Generators & solar
User avatar
DougP
Posts: 139
Joined: Sun Apr 12, 2020 10:11 pm
Answers: 2
Has thanked: 8 times
Been thanked: 20 times

Re: Request a new Forum here

Post by DougP »

3000 Section 3 title :)

Selection and Installation of Wiring Systems
User avatar
DougP
Posts: 139
Joined: Sun Apr 12, 2020 10:11 pm
Answers: 2
Has thanked: 8 times
Been thanked: 20 times

Re: Request a new Forum here

Post by DougP »

And if we can change "Main switchboards" to just Switchboards ?
RV7
Posts: 1
Joined: Mon Apr 13, 2020 7:49 pm
Has thanked: 0
Been thanked: 0

Re: Request a new Forrum here

Post by RV7 »

Good on you Greg for setting this up.

Supplementary standards and legislation (act, regs ect).
Patient areas,
Explosive atmospheres.
Apprentices and training.
(Private) inspector sub forum
User avatar
AngryClient
Posts: 12
Joined: Tue Apr 21, 2020 3:45 pm
Location: Nope
Has thanked: 0
Been thanked: 2 times

Re: Request a new Forrum here

Post by AngryClient »

Agree we need one for Hazardous Areas. But can we call it Hazardous Areas (as per Regulations) rather than Explosive Atmospheres (as par standards)?
User avatar
DougP
Posts: 139
Joined: Sun Apr 12, 2020 10:11 pm
Answers: 2
Has thanked: 8 times
Been thanked: 20 times

Re: Request a new Forrum here

Post by DougP »

Maybe we should have one for "Employment offered and Work Wanted" or similar. Or both?

Maybe under "off topic" ? Although it's probably very much "on topic" now that people will be going back to work or not.
These users thanked the author DougP for the post:
gregmcc (Mon Apr 27, 2020 6:34 pm)
Rating: 16.67%
User avatar
gregmcc
Site Admin
Posts: 103
Joined: Sun Apr 12, 2020 4:45 pm
Has thanked: 5 times
Been thanked: 34 times

Re: Request a new Forrum here

Post by gregmcc »

I've created an Employment sub topic under Off Topic, I have also created a Buy/Sell/Wanted topic.
These users thanked the author gregmcc for the post:
Mazdaman (Wed Apr 29, 2020 9:33 pm)
Rating: 16.67%
JamieP
Posts: 170
Joined: Tue Apr 14, 2020 11:08 am
Has thanked: 26 times
Been thanked: 8 times

Re: Request a new Forum here

Post by JamieP »

Damp Situations
PaleAle
Posts: 1
Joined: Thu Apr 16, 2020 11:16 am
Has thanked: 0
Been thanked: 0

Re: Request a new Forum here

Post by PaleAle »

Certification?
User avatar
gregmcc
Site Admin
Posts: 103
Joined: Sun Apr 12, 2020 4:45 pm
Has thanked: 5 times
Been thanked: 34 times

Re: Request a new Forum here

Post by gregmcc »

PaleAle wrote:
Fri May 01, 2020 7:29 am
Certification?

I think this would fall under testing and verification
User avatar
eTeam
Posts: 7
Joined: Mon Apr 20, 2020 7:40 pm
Location: Pukekohe
Has thanked: 2 times
Been thanked: 0

Re: Request a new Forum here

Post by eTeam »

I know that this is an electrical forum but for us residential sparkies

Data & TV distribution
Alarms
medistat
Posts: 9
Joined: Tue Apr 14, 2020 12:27 pm
Has thanked: 0
Been thanked: 0

Re: Request a new Forum here

Post by medistat »

How about one to cover security systems.... many of us have no idea about the difference between analogue and ip cameras and when the ip cameras guys start poking new cables in beside ours, or telling us where to put sockets for 'switches' and 'rooters' then it's a foreign language.
User avatar
gregmcc
Site Admin
Posts: 103
Joined: Sun Apr 12, 2020 4:45 pm
Has thanked: 5 times
Been thanked: 34 times

Re: Request a new Forum here

Post by gregmcc »

I've added Security to the Data, Alarms, & TV Distributions.

We will see how it goes and if need be they can be separated out easily if one in particular gets busy
Post Reply